Skip to content

HomeScan-to-BIM

Point Cloud Modeling Services: BIM and CAD Models from Your Scan Data

Point cloud modeling turns a laser scan you already have into files a design team can work in: a Revit model, a set of CAD drawings or a mesh. You send the registered point cloud, we check what it can support, and the model is built against the points, element by element. The work is done remotely from your files, with no site visit. A Revit model from a registered cloud costs $0.15 to $0.30 per square foot, from about $800, and the quote arrives within one business day.

What we build from a point cloud

DeliverableWhat it containsFiles
Point cloud to BIMA model of the architecture and the structure at the level of development the scope names, the mechanical, electrical and plumbing systems can be added where the cloud shows themRVT, IFC, ArchiCAD
Point cloud to CADFloor plans, reflected ceiling plans, elevations and sections drawn from the cloudDWG, PDF
Point cloud to mesh or solidA cleaned mesh of an object or a surface, or a solid CAD model of a part with its design sizes restoredSTL, OBJ, STEP

The usual order is a Revit model of an existing building for a renovation, a fit-out or an addition. The model is delivered in the Revit version your office works in, or as IFC or an ArchiCAD file when your team does not use Revit. What the model contains at each level of development is described on the scan-to-BIM page, and the systems scope under MEP BIM and drafting.

When the project needs sheets and no model, the plans, elevations and sections are drafted from the same cloud; the as-built drawings page lists what a set includes, and the guide to point cloud to CAD services explains how the scope of a drawing package is written. A scan of a part or a machine is rebuilt as a solid CAD model; that work is described under reverse engineering.

What to send

  • The registered point cloud. E57, RCP/RCS, LAS, PTS and PTX all work, and so do the scanner formats that Autodesk ReCap imports, such as FLS, ZFS and PTG.
  • The registration report, if the scanning software produced one. It shows the error of each station and the overlap between scans.
  • The station photographs or panoramas, if the scanner took them. They settle what a cluster of points is: a duct, a beam or a stack of boxes.
  • The scope: the area to model, the level of development, the element categories, and the Revit version or the other format you need.
  • Existing drawings, where there are any. The geometry comes from the cloud; old drawings supply room names and system names.

The cloud of a house often runs to several gigabytes, so it is sent as a download link from the file service you already use, in the quote request or by email.

How the cloud is checked before the quote

The cloud is read before anything is priced, because it sets what the model can show and how accurate it can be. The first check is the registration: all stations have to sit in one coordinate system, and the report, or the overlap between neighboring stations, has to show that they fit. The guide to registered vs unregistered point clouds explains why this decides whether modeling can start.

The second check is coverage. Rooms nobody scanned, ceilings that stayed closed and walls hidden behind shelving leave holes in the cloud, and those areas cannot be modeled from it. The third is density and noise, which set the level of development and the accuracy the cloud can carry. A cloud from a handheld or mobile mapping scanner can be modeled as well; it is usually noisier than a tripod scan, and the difference is covered in LiDAR vs TLS vs photogrammetry.

If the cloud has gaps, or does not support the level you asked for, we say so before you order. Areas with gaps are left out, or taken from existing drawings and marked as unverified. The cloud has to arrive registered: station files that were never joined into one cloud go back to whoever scanned them first.

From the point cloud to the Revit model

Revit links a point cloud as an indexed RCP or RCS file, so an E57, LAS or PTS file is indexed to that format first; we do it in Autodesk ReCap. The cloud is then linked into the Revit project on shared coordinates, so the model and the scan stay aligned when the file goes to your team, and each element is modeled to the points. Before delivery the modeled surfaces are compared with the cloud, and elements that sit outside the stated accuracy are corrected. The point cloud to Revit guide walks through the link step, and the scan-to-BIM workflow post covers the whole sequence.

Level of development and accuracy

The scope names a level of development per element category, in the terms of the BIMForum Level of Development Specification. LOD 300 is the usual order: each element is modeled so that its size, shape and location can be measured. LOD 200 is enough for a feasibility study, and LOD 350 is used for the elements that have to be coordinated with new work. The guides to BIM LOD 300 and LOD 200 vs LOD 300 show the difference on real elements.

Accuracy is stated separately, in the Level of Accuracy terms of the U.S. Institute of Building Documentation. The quote names the level of accuracy next to the level of development. A model from a good tripod scan is usually represented at LOA30, which means its surfaces deviate from the measured building by no more than 15 mm at the 95 percent confidence level.

Price and time

A Revit model from your registered point cloud costs $0.15 to $0.30 per square foot, from about $800, for the architecture and the exposed structure at LOD 300. A 10,000 square foot floor comes to about $1,500 to $3,000. The higher figure belongs to small areas and to floors cut into many rooms; an open warehouse bay or an open-plan floor sits at the low one. Visible mechanical, electrical and plumbing systems add about 15 to 25 percent. Drawings without a model, and meshes or solids of objects, are quoted on the cloud and on the list of sheets or parts. The scan to BIM cost guide gives the prices by building size, with the scan and without it.

The quote is a fixed price and arrives within one business day of your sending the cloud and the scope. The model usually follows in two to three weeks for a house, in two to four weeks for a commercial floor and in four to six for a whole building, depending on the level of development and the categories.

When the cloud turns out to have gaps that matter, the missing areas can be scanned and added to it. The 3D laser scanning page describes the field work, and we scan in all 50 states.

Frequently asked questions about point cloud modeling

What is point cloud modeling?

Building a BIM model, CAD drawings or a mesh from the points a laser scanner measured. The geometry is taken from the cloud, so the result follows the building as it was measured where it differs from the old drawings.

Which point cloud formats do you accept?

E57, RCP/RCS, LAS, PTS and PTX, and the scanner formats that Autodesk ReCap imports, such as FLS, ZFS and PTG. The cloud has to be registered into one coordinate system.

Can you model from a point cloud that another company scanned?

Yes, when it is registered. The cloud is checked for registration, coverage and density before the quote.

How much do point cloud modeling services cost?

A Revit model from a registered point cloud costs $0.15 to $0.30 per square foot, from about $800. Visible MEP systems add about 15 to 25 percent. Drawings and meshes are quoted on the cloud.

How long does modeling from a point cloud take?

Usually two to three weeks for a house, two to four weeks for a commercial floor and four to six for a whole building, counted from the day the order is confirmed.

What if the point cloud has gaps or is not registered?

Areas with gaps are left out of the model or taken from existing drawings and marked as unverified, and they can be scanned and added later. A cloud that is not registered has to be registered by whoever scanned it before modeling can start.

Which LOD do you model to?

LOD 300 for most orders, LOD 200 for massing and feasibility, and LOD 350 for the elements that meet new work. The level is set per element category and listed in the quote.

Can you deliver the model in ArchiCAD or as IFC?

Yes. The model is delivered as a Revit file in your version, as IFC, or as an ArchiCAD file.

Do you convert a point cloud to a mesh?

Yes, for objects and surfaces: a cleaned mesh in STL or OBJ, or a solid CAD model in STEP when the part has to be machined or modified.

Sources

Ready when your site is.