Skip to content

HomeScan-to-BIM

BIM Modeling Services: Revit Models of Existing Buildings

Our BIM modeling services produce a 3D model of an existing building in Revit, from whatever record of the building you have: a laser scan we take, a point cloud you already hold, or a set of 2D drawings. The model covers the architecture and the structure, and the mechanical, electrical and plumbing systems when they are in scope. A model from an existing point cloud costs $0.15 to $0.30 per square foot, from about $800; the table gives the price for each starting point.

Three ways to start a BIM model

You haveWe needTypical price of the modelDetails
A building nobody has scannedThe address and the scopeWith the scan: a house $2,000 to $4,500, a commercial floor $3,000 to $9,000Scan-to-BIM
A registered point cloudThe cloud in E57, RCP/RCS, LAS or PTS$0.15 to $0.30 per sq ft, from about $800Point cloud modeling
2D drawings in DWG, or a PDF set redrawn firstThe set, with its dimensionsQuoted on the setCAD to BIM

The three differ in what the geometry is taken from. A model from a scan or a point cloud follows the building as it was measured. A model from drawings follows the building as the drawings show it, and the scope says so. When part of a building was scanned and the rest exists only on paper, the two are combined in one model and each part is marked with its source.

What is modeled: architecture, structure and MEP

Architectural BIM modeling covers the walls with their real thicknesses, the floors and roofs, the doors and windows at their measured positions, the stairs, the ceilings and the fixed casework. This is the model a renovation, a fit-out or an addition is designed in.

Structural BIM modeling covers the columns, beams, slabs, bearing walls and trusses that can be seen or that the drawings give sizes for. Framing closed inside a finished wall or ceiling is modeled from drawings where they exist and marked as taken from them.

MEP modeling covers the ducts, pipes, conduit, cable tray, sprinkler mains and equipment that run today. Visible systems add about 15 to 25 percent to the price of a model; plant rooms and dense systems above the ceiling are described under MEP BIM and drafting.

Revit modeling services to your standards

The model is delivered in the Revit version your office works in, with the element categories and the level of development listed in the quote. When you send your Revit template, the model is built in it. When the source is a scan, the point cloud is linked on shared coordinates and comes with the model, so anyone on the team can check an element against the points it was built from. Teams that do not use Revit get the model as IFC or as an ArchiCAD file.

Level of development and accuracy

Two things are agreed before modeling starts. The first is how far each kind of element is developed, in the BIMForum levels: LOD 200 for a massing or feasibility model, LOD 300 for a renovation design, LOD 350 where existing elements have to be coordinated with new work. The scan-to-BIM page quotes the definitions, and the guides to LOD in BIM and BIM LOD 300 show them on real elements.

The second is how close the model is to the building, which depends on what it was built from. A model from a tripod scan is usually represented at LOA30 in the U.S. Institute of Building Documentation's terms: its surfaces deviate from the measured building by no more than 15 mm at the 95 percent confidence level. A model from drawings is as accurate as the drawings, and no level is stated for it.

BIM outsourcing services for design firms

For an architecture or engineering firm that outsources BIM modeling of existing buildings, the arrangement is simple: a fixed price per building, a scope that lists the element categories and the LOD, and a model built in the firm's own template and Revit version. The model is checked against its source, the scan or the drawings, before it is delivered.

Price and time

With the scan included, a Revit model of a house or an apartment usually costs $2,000 to $4,500, an office or a commercial floor $3,000 to $9,000, and a large building from $12,000. A model from a registered point cloud you already have costs $0.15 to $0.30 per square foot, from about $800. A model from 2D drawings is quoted on the set: its area, how complete it is and the categories to model. The guide to scan to BIM cost gives the price per square foot by building size.

The quote is a fixed price and arrives within one business day. From a scan or a point cloud, the model usually follows in two to three weeks for a house, in two to four weeks for a commercial floor and in four to six for a whole building. A model from drawings usually takes one to three weeks.

Frequently asked questions about BIM modeling services

What are BIM modeling services?

Building a model of a building in BIM software, usually Autodesk Revit, in which every wall, floor, beam or duct is an object with its size and position. For an existing building the model is built from a laser scan, a point cloud or the drawings.

How much do BIM modeling services cost?

A model from a registered point cloud costs $0.15 to $0.30 per square foot, from about $800. With the laser scan included, a house or an apartment usually runs $2,000 to $4,500 and an office or a commercial floor $3,000 to $9,000. A model from 2D drawings is quoted on the set.

Do you offer Revit modeling services without a scan?

Yes. Revit modeling services without a scan start from a point cloud you already have or from 2D drawings.

Which LOD do you model to?

LOD 300 for a renovation design, LOD 200 for massing and feasibility, and LOD 350 for the elements that meet new work. The scope sets the level for each element category.

Do you model MEP systems?

Yes, where the scan or the drawings show them. Visible systems add about 15 to 25 percent to the price of the model.

Can you work in our Revit template?

Yes. Send the template and the Revit version, and the model is built in them.

Which formats do you deliver?

Revit in your version, IFC, or an ArchiCAD file. Drawings cut from the model are delivered in DWG and PDF.

How long does BIM modeling take?

From a scan or a point cloud, usually two to three weeks for a house, two to four weeks for a commercial floor and four to six for a whole building. From drawings, usually one to three weeks.

Sources

Ready when your site is.