Laser Scanning for Facade Restoration
Laser scanning for facade restoration produces a measured, dimensionally accurate exterior record (a registered point cloud plus true-to-scale elevations) that a design team can use before repair drawings begin. Instead of hanging off a swing stage with a tape measure, you get a 3D dataset that locates every opening, cornice line, parapet, and out-of-plane bulge in real coordinates. That record becomes the base for CAD elevations, sections, rectified orthophotos, and BIM or HBIM support.
The scan documents what is visible on the day it is captured. It does not diagnose why masonry has shifted or replace a structural or facade-inspection review. It gives the responsible professionals reliable geometry to work from.
Why facades are hard to measure by hand
The information that matters on a facade is spread across height, depth, and ornament, and most of it sits well out of arm’s reach. A masonry building can have shifted openings, bowed brick, displaced lintels, and a cornice that no longer runs true, and none of that is measurable from the sidewalk with a tape. Add the usual access realities (street and pedestrian control, parked cars, trees, adjacent buildings, reflective glass, restricted roof access) and manual measurement quickly stops capturing the real relationship between openings, string courses, and movement.
Terrestrial laser scanning solves this by recording millions of points per setup. A survey-grade terrestrial scanner is worked from a tripod, with multiple stations placed at varying distance and angle around the building so the laser reaches behind projecting elements like balconies, cornices, and pilasters. Upper facade and roof-edge coverage is the genuinely hard part: from ground level those surfaces are seen at a steep oblique angle and shadowed by the elements in front of them. Station geometry is planned to minimize that occlusion, and where coverage is critical we add elevated positions from a lift, an adjacent roof, or scaffold once it is up.
How the data comes together
Each setup is a separate scan. Registration aligns them into one coordinate system, usually cloud-to-cloud with overlap between stations, and tied to survey control where the project needs the sides of a building to close into a single accurate loop or to sit on a site datum. For a typical urban facade or a full building wrap, expect about a day on site, more or less depending on the number of elevations, access windows, and whether interiors are included.
The registered result is delivered as an E57 point cloud (the open exchange format) or as RCP/RCS for teams working in Autodesk tools. From there, the deliverable depends on what the restoration team actually needs.
| Deliverable | What it is | Common format |
|---|---|---|
| Registered point cloud | The measured exterior record, all stations aligned | E57, RCP/RCS |
| Facade elevation | 2D scaled linework: openings, sill and head heights, cornice and parapet lines, material transitions | DWG, PDF |
| Building section | Vertical relationships, floor-to-floor, parapet and cornice projection | DWG, PDF |
| Rectified orthophoto | True-to-scale photographic image of the facade, ideal for ornament | TIFF, PDF |
| BIM / HBIM support | Modeled wall planes and openings at an agreed LOD | RVT, IFC |
Orthophotos beat over-modeling ornament
Ornament is where facade scope quietly explodes. Tracing every dentil, rosette, and carved spandrel into CAD linework, or modeling it at high LOD in Revit, is slow and expensive, and the result is rarely what a restoration mason needs. A better answer is usually a rectified orthophoto: a true-to-scale photographic image of the facade, geometrically corrected against the point cloud, where the team can measure directly off the picture. Detailed linework or modeling then gets reserved for the specific elements being rebuilt or replaced.
That is also the cleanest way to define scope. Decide up front whether ornament is shown as simplified outlines, left in the point cloud, drawn only in named detail areas, or covered by orthophotos. Trying to draw every surface variation makes the package heavy and costly without serving the work.
Deviation analysis for bowing and lean
One of the most useful facade outputs is a deviation (heat-map) analysis. The point cloud is compared against an idealized reference plane, and color shading shows where the wall bows out, leans, or sits out of plane, with magnitudes in real units. For a restoration team weighing whether brick is shifting or a parapet is tilting, this turns a vague concern into measured input. It is documentation, not diagnosis: it shows that a wall is 40 mm out of plumb over its height, not why. Cause stays with the structural engineer.
Levels of accuracy, not levels of price
Facade accuracy is described by the USIBD Level of Accuracy (LOA) framework, which sets the represented and measured tolerance of the deliverable, and by LOD when the output is a model. Those define what you are getting. They are not a price list, and there is no single per-square-foot rate for facade work. What drives effort is the density of elements you need documented and the detail level you ask for, not the raw area of wall. A plain four-story brick elevation and an ornate terracotta facade of the same size are very different jobs.
Scaffolding changes what you can scan
Scaffold timing helps or hurts coverage. Scanning before scaffold goes up captures the full uninterrupted facade surface, which is the cleanest existing-condition record. Scanning after it is erected gives close access to individual details (good for selective high-detail capture) but the scaffold itself blocks large areas of the wall behind it. Scanning during the work can document conditions that were hidden before, such as a deteriorated backup wall once cladding comes off. If a scaffold drawing, lift schedule, or access plan exists, send it before the scan is planned so the scan can be sequenced around it.
Tying exterior to interior
Some facade projects need the exterior tied to interior conditions: true wall thickness, floor-to-facade alignment, window positions read from both sides, or coordination into a Revit model. An exterior-only scan will not carry that information. If those relationships matter, include interior capture in the scope so registration can connect the two.
From point cloud to drawings and models
Once the cloud is registered, 2D and 3D production follows. Scaled CAD elevations and sections are the most common facade deliverable; see our CAD drafting service for how view types and detail levels are scoped. When the project runs in Revit, the point cloud to Revit workflow explains how scan data becomes a usable model, and our scan-to-BIM and as-built documentation services cover the modeled and drawn outputs. For curtain wall and glazing replacement see facade scanning for glazing replacement.
If you are working on an older or landmarked building, the related guides on 3D scanning for historic preservation and as-built documentation for historic buildings go deeper on irregular geometry and conservation records.
What to send for a fast, accurate quote
The clearest quotes come from a short, specific brief: facade photos, the building address, number of stories, which sides are included, access notes (sidewalk, roof, lifts, traffic control), any scaffold or lift schedule, your deadline, existing drawings if you have them, and the deliverables you actually need (point cloud, CAD elevations, orthophotos, sections, BIM, or a full package). Naming the deliverable is the single thing that prevents scope drift. “Add an east elevation at 1:50” is actionable; “make the facade more detailed” is not.
Ready to scope a facade scan? Request a quote with your photos and access notes, and we will come back with a scan plan and deliverable list.
FAQ
How does 3D laser scanning work?
A survey-grade terrestrial scanner sits on a tripod and sweeps a laser across everything in view, recording millions of distance-and-angle measurements per setup as a 3D point cloud. It is moved to multiple stations around the facade so the laser reaches behind projecting elements, then register (align) all the setups into one accurate coordinate system, tied to survey control when needed.
What are as-built drawings?
As-built drawings document a structure as it physically exists, rather than as originally designed. For a facade that means scaled elevations and sections showing the real positions of openings, cornices, parapets, and material transitions, drawn from measured scan data instead of from assumptions or old record sets.
What is scan to BIM?
Scan to BIM is the process of turning a registered point cloud into a 3D building information model, typically in Revit, with walls, openings, and facade elements built to an agreed level of detail. It is the modeled alternative to flat 2D elevations and is useful when the project needs coordinated geometry rather than drawings alone.
How much does 3D laser scanning cost?
No per-square-foot rate fits every facade. Price is per project, quoted within one business day, and cost tracks the number of elevations, access difficulty, and the detail of the downstream deliverable rather than wall area. A registered point cloud starts from about $1,200 for a house or a floor; with elevations or a model, a house with its facades and the site is typically $2,500 to $5,000, and large buildings start from $12,000. The most reliable number comes from a brief that names the building, the sides, the access, and the output, so send those for a real quote.


