Skip to content

HomeLocations

3D Scanning Services in New York City: Buildings and As-Built Drawings

We laser scan existing buildings in all five boroughs of New York City and turn the scan into existing conditions drawings in DWG and PDF, or a Revit model. A house or an apartment with its drawings usually costs $2,000 to $4,500, an office or a commercial floor $3,000 to $9,000, and a large building from $12,000. The usual reason to order an as-built survey in New York is a building that is older than its drawings: a filing, a renovation or a lease needs plans that match what is there, and nobody has them.

Prices in New York City

The price covers the scan on site and the drawings or the model built from it, and it is a fixed price for the project.

What is scanned and drawnTypical price
A single room, a basement or one small floorFrom about $1,000
An apartment, a townhouse or a house$2,000 to $4,500
A house with its facades and the site$2,500 to $5,000
An office, a store or another commercial floor$3,000 to $9,000
A large building, about 40,000 square feet and overFrom $12,000, quoted on its own
Registered point cloud only, for a team that draws from itFrom about $1,200 for a house or a floor

These are our typical ranges, and a specific building can land outside them. The guides to as-built drawings cost and scan to BIM cost give the price per square foot by building size.

What you get

DeliverableFormatWhat it is for
Floor plans and reflected ceiling plansDWG, PDFThe existing conditions sheets a design or a filing starts from
Elevations and sectionsDWG, PDFFacades, storefronts, floor-to-floor heights, stairs and roofs
Revit or ArchiCAD modelRVT, IFC or an ArchiCAD fileDesign and coordination when the team works in BIM
Registered point cloudE57, RCP/RCSThe measured record behind the drawings; a dimension nobody asked for is still in it

The quote names the accuracy of the drawings or the model in the Level of Accuracy terms of the U.S. Institute of Building Documentation. Each sheet says which lines were measured and which were taken from other documents. The scan records the surfaces that can be seen and reached; what sits behind a finished wall or above a hard ceiling is taken from existing drawings where they show it, and marked as such. The as-built drawings, scan-to-BIM and 3D laser scanning pages describe each deliverable.

Where measured drawings come up in New York

We measure and draw the building as it stands and hand the drawings to the people who file: your Registered Architect or Professional Engineer, often with an expediter. Their filing is drawn on our base.

SituationWhat the city saysWhat we measure
A change of use, egress or occupancyThe Department of Buildings says a Certificate of Occupancy "states a legal use and/or type of permitted occupancy of a building", and that existing buildings need a current or amended one "when there is a change in use, egress or type of occupancy"Floor plans with rooms, exits, stairs and door widths as they are today
A building from before 1938By the same department, buildings built before 1938 "are not required to have a CO unless later alterations changed the use, egress, or occupancy"; for such a building the department can issue a Letter of No Objection for a use, on the conditions its page listsPlans of a building that may never have had a complete set on file
A designated landmarkThe Landmarks Preservation Commission requires a permit "before doing work that affects the exterior and, in some cases, the interior of a designated landmark property", with supporting documentation such as photographs and architectural plansFacade elevations and sections with the masonry, openings and cornices at their measured sizes
A building over 25,000 square feetUnder Local Law 97, "most buildings over 25,000 square feet are required to meet new GHG emissions limits beginning in 2024"Mechanical rooms, roofs and exposed systems, so a retrofit is designed against what is installed
A building under the Loft LawThe Loft Law generally covers former commercial and manufacturing buildings that three or more families occupied as residences in the periods the law names, and the Loft Board coordinates "the legal conversion of these spaces"Open floors, columns, slabs and the stairs and shafts that serve them

Where a project has a land surveyor's control, the point cloud can be tied to it, so the drawings and the property survey share one coordinate system.

Buildings we scan in New York

  • Brownstones, row houses and townhouses. Narrow lots, party walls, stacked floors and a stair in the middle. The cellar, every floor, the roof and both facades are scanned so the sections line up from top to bottom.
  • Apartments, co-ops and condo units. One unit at a time, usually in a day, with the windows, risers and beams that a kitchen or bath layout has to work around.
  • Lofts and former industrial floors. Long open spans, column grids that are rarely square, and slabs that are not level.
  • Stores, restaurants and offices. The floor, the ceiling with its lights and diffusers, the storefront and the back of house, for a fit-out or a lease.
  • Mechanical rooms, roofs and facades. Equipment, pipes and ducts where they are exposed, and facades scanned from the street and from the roof.

Parts and objects are scanned as well, with a handheld scanner: a small object scanned to a mesh usually costs under $1,000, and a part rebuilt as a CAD model in STEP starts at about $1,000. The 3D scanning for parts and reverse engineering pages describe that work.

Working in an occupied building

The scanner stands on a tripod and measures with a laser. Nothing is drilled, cut or taken apart, and people can stay in the building while it works. Tell us the hours the building allows, which rooms are locked, whether the freight elevator has to be booked and whether ceiling tiles may be lifted, and the visit is planned around that. Furniture and stock hide floor and wall lines, so a space that can be cleared is scanned faster and drawn more completely.

How a project runs

  1. You send the address, the approximate area and what you need: the sheets, or the model and its level of development.
  2. You get a fixed quote within one business day.
  3. We scan. A house, an apartment or one commercial floor is usually a day.
  4. The registered point cloud usually follows within a few days, the drawings in two to three weeks for a house, two to four weeks for a commercial floor and four to six for a whole building.

Where we work

Manhattan, Brooklyn, Queens, the Bronx and Staten Island, and the counties around the city: Nassau, Suffolk and Westchester in New York, and Hudson, Bergen and Essex across the river. We are a New Jersey company.

Frequently asked questions about laser scanning in New York City

How much does 3D laser scanning cost in New York City?

With drawings or a model, an apartment, a townhouse or a house usually costs $2,000 to $4,500, an office or a commercial floor $3,000 to $9,000, and a large building from $12,000. A single room or one small floor starts at about $1,000, and a registered point cloud alone at about $1,200.

Who files with the Department of Buildings?

Your Registered Architect or Professional Engineer, often through an expediter. We give them the existing conditions drawings to start from.

Can the drawings be used for a Certificate of Occupancy change or a legalization?

Yes, as the existing conditions base your architect or engineer draws on. The Department of Buildings requires a current or amended Certificate of Occupancy "when there is a change in use, egress or type of occupancy", and those drawings start from where the walls, exits and stairs are today.

Do you scan landmark buildings?

Yes. Scanning touches nothing on the building. The Landmarks Preservation Commission's permit applies to the work that follows, and its application is supported by documentation such as photographs and architectural plans of the proposed work; measured elevations of the existing facade are what those plans start from.

Can you scan an apartment or an office that is in use?

Yes. The scan is quiet and makes no dust, and it is planned around the building's hours and the people in it.

How fast can you start?

The quote arrives within one business day. The scan is scheduled as soon as the project needs it, often within days of the order.

Which parts of the city do you cover?

All five boroughs: Manhattan, Brooklyn, Queens, the Bronx and Staten Island, with Long Island, Westchester and northern New Jersey around them.

Sources

Ready when your site is.