Skip to content

BlogGuides

As-Built Survey: Land Survey vs Building Scan Explained

As-Built Survey: Land Survey vs Building Scan Explained

An as-built survey is a survey made after construction to record what was actually built, and the phrase is used for two different jobs. The first is a licensed land surveyor’s survey of a lot: where the foundation and building sit, how far they are from the lot lines, at what elevations, and where the utilities run. The second is a measured survey of the building itself, usually by 3D laser scan, drawn up as floor plans, elevations, sections or a model. This guide explains each one, who does it, what it delivers and how to tell which one a request is asking for.

What is an as-built survey

There is no single legal definition that covers both meanings. Searchers, permit offices and design teams all use the phrase, and they usually mean different things by it.

  • The site meaning. A survey of the property after construction, signed and sealed by a licensed land surveyor, showing the constructed improvements against the lot and against the approved plans.
  • The building meaning. A set of measurements of an existing building’s interior and exterior, turned into drawings or a model, with no license attached to the measuring itself.

Both are correct uses of the words. A municipal permit office asking for an “as-built survey” means the first. An architect asking for an “as-built survey” before a renovation usually means the second. When the two sides do not check which one is meant, the wrong document gets ordered.

What is an as-built survey by a licensed land surveyor

This is the survey a town asks for at the end of a new house, an addition or a site improvement. A licensed surveyor locates the finished work in the field and certifies it against the permit.

Requirements are set locally, so the clearest way to see what they ask for is to read a few. The City of Golden Valley, Minnesota, requires that “a certified As-Built Survey verifying the information indicated on the proposed survey shall be submitted before a Certificate of Occupancy can be issued” for construction of a new home or building, and the same document says that surveys, when required, must be prepared by a registered land surveyor licensed in Minnesota. The proposed survey it refers to shows lot lines, easements, setbacks, grades and the location of buildings and structures.

The Town of Plymouth, Massachusetts, asks for two certified as-built plans on permits issued after February 1, 2009: a foundation plan and a final plan, both signed and stamped by a land surveyor. No foundation inspection is done until the foundation plan has been submitted and approved. The final plan must be submitted before a Certificate of Occupancy is issued and must identify protrusions such as decks, steps, bulkheads, overhangs and outside chimneys. The surveyor certifies that “lot corners, dimensions, elevations, and setbacks” are correct and conforming to the town’s bylaws for the zone.

So the site-meaning as-built survey typically covers:

  • the location of the foundation and the finished building on the lot;
  • distances to lot lines (setbacks) and to easements;
  • elevations of the foundation and floors;
  • finished grades and drainage;
  • the location of constructed utilities.

It is a legal and regulatory document. Its value comes from the surveyor’s license, signature and seal, and from the boundary evidence behind it.

What is a civil engineering as-built survey

Larger site work has a second kind of site as-built: the survey that records constructed roads, storm and sanitary sewers, water mains and similar improvements against the approved construction plans. The City of Orlando, Florida, publishes an as-built survey checklist for both public and private improvements. It requires that the survey “must be prepared by a Florida Licensed Professional Surveyor and Mapper” and that the as-built data be overlaid on the approved construction plan set, so the designed and constructed locations and elevations can be compared. The minimum list of improvements includes storm and sanitary sewers and structures, potable and reclaimed water mains, valves and meters, gas mains, duct banks, pavement, curbs, sidewalks, driveways and buildings.

The same checklist sets a tolerance: constructed public stormwater and sanitary sewer improvements must be within 0.5 feet horizontally and 0.2 feet vertically of the location shown on the construction plans. That is a rule of one city and one department, not a national standard. Other jurisdictions ask for different items, sheets and tolerances, and the engineering department that issues the permit is the one to ask.

In Florida, the state’s surveyor rules list “As-built/Record Surveys” among the types of survey that fall under the practice of surveying and mapping. Other states regulate surveying under their own laws.

What is an as-built survey of a building

The building meaning is a measured survey of a structure as it stands. The surveyor, or a scanning company, records the geometry of the rooms, walls, openings, ceilings, floors and exterior, and the result is drawn as floor plans, reflected ceiling plans, elevations and sections, or built as a Revit model.

Today the measuring is commonly done with a terrestrial 3D laser scanner. The scans are joined into one coordinate system (see point cloud registration) and the drawings are traced from the registered point cloud, so a wall on the plan is where the wall stands, within a stated accuracy. What these drawings contain is covered in what as-built drawings include, and how they differ from the contractor’s markups and the architect’s closeout set is covered in as-built vs record vs measured drawings.

WeAre Capture does this second kind only. We deliver registered point clouds and as-built drawings in DWG and PDF, traced from the scan. We do not perform licensed land surveying and do not certify boundaries, setbacks or site elevations.

Land survey vs building scan: comparison

Licensed land as-built survey Building as-built survey (laser scan)
Subject The lot: foundation, building footprint, setbacks, grades, utilities The building: rooms, walls, ceilings, openings, facades
Who does it A land surveyor licensed in the state A scanning or documentation company; the architect or engineer uses the result
Deliverable Signed and sealed survey plan or plat, site as-built plan Registered point cloud, floor plans, elevations, sections, ceiling plans, Revit model
Why it is ordered A permit, final inspection or certificate of occupancy; closeout of site work A renovation, tenant fit-out, facility record, leasing, modeling
Who requires it The municipality or engineering department The design team or the owner
Legal weight Certified by the surveyor’s license and seal The accuracy that the scope states; no boundary or setback certification
Typical timing At completion; some towns also ask for one at the foundation stage Before design starts, or at handover

When do you need which

If a building department, planning office or engineering department asks for an as-built survey, it wants the licensed land surveyor’s survey. Read its checklist, and hire a surveyor licensed in that state. The permit office, not the design team, decides what counts.

If a design team asks for as-builts of a building before a renovation, a tenant improvement or a model, it wants the building survey. That is a measurement job, and the scan answers it.

Some projects need both. A building addition might need a surveyed foundation and setback plan for the permit and a scan of the existing structure so the addition lines up with it. The two are separate scopes from separate providers, and they can share control points if the teams coordinate in advance.

A laser scan of a building does not replace a licensed land survey where a jurisdiction requires one. A scan can show where walls stand relative to each other, but it carries no surveyor’s certification of the lot lines, setbacks or elevations that a permit office asks for. Requirements vary by state and by municipality, including who may sign, which sheets are required and what they must show. Confirm the requirement with the issuing office before ordering anything.

What each one cannot tell you

A land as-built survey locates the building as a footprint on the lot. It does not give the interior: room sizes, ceiling heights, wall thicknesses or the structure behind a facade are outside its scope.

A building scan measures what the scanner can see. It does not find lot corners, easements or buried utilities, and hidden framing and the inside of a wall are drawn from other documents or from openings made for the survey. For existing-condition work in a renovation, the guide to existing conditions documentation covers how the scan is used in practice.

FAQ

What is an as-built survey?

Either a licensed land surveyor’s survey of what was built on a lot, used for permits and the certificate of occupancy, or a measured survey of a building, usually by laser scan, used for renovation drawings and models. Check which one the requester means.

Who does an as-built survey?

A licensed land surveyor does the site survey; who may sign varies by jurisdiction. A scanning or documentation company does the building survey.

Do I need an as-built survey for a certificate of occupancy?

Many municipalities ask for one on new homes and additions, as in Golden Valley, Minnesota and Plymouth, Massachusetts, but it varies by state and municipality. The local building department confirms whether it applies and what it must show.

Can a laser scan replace an as-built land survey?

No, not where a jurisdiction requires a licensed land survey. A scan of a building has no surveyor’s certification of lot lines, setbacks or site elevations.

What does an as-built survey show?

The land survey shows the foundation and building on the lot, setbacks, elevations, grades and utilities. The building survey shows the interior and exterior geometry as plans, elevations, sections or a model.

Sources

Ready when your site is.