Skip to content

BlogGuides

What Is a Revit Model? RVT Files, Families and DWG Compared

What Is a Revit Model? RVT Files, Families and DWG Compared

A Revit model is a single database of building elements, such as walls, floors, doors and ducts, saved in an RVT file by Autodesk Revit. Plans, sections, elevations, 3D views, sheets and schedules are not drawn separately: they are views of that one database, so a change made in one place shows up everywhere. If an architect, engineer or lender asked you for “a Revit model”, this guide explains what that file holds, how it differs from a DWG drawing, what limits it has, and when drawings are enough.

What is a Revit model

Autodesk describes the idea in its Revit help: as you work on the building model, Revit collects information about the building project, and every drawing sheet, 2D and 3D view, and schedule is a presentation of information from the same virtual building model. The same page says the Revit parametric change engine automatically coordinates changes made anywhere, whether in a model view, a sheet, a schedule, a section or a plan.

In practice this means a Revit model is made of objects, not lines. A wall in the model is a wall: it has a height, a thickness, a layer structure and a position on a level. A door sits in a wall and knows which wall it belongs to. A plan view shows these objects cut at a plane, a section shows them cut along another, and a door schedule is a table read from the same door objects. Nobody redraws the schedule when a door is added.

The model is stored in one file with the extension .rvt. The elements, views, sheets and schedules live inside it. Linked files, such as a point cloud or a CAD site plan, stay outside it and are referenced.

What a Revit model contains: categories, families, types and instances

Every element in a Revit model is organized in four levels. Autodesk’s help defines them as follows.

Term Meaning in Revit Example
Category The classification for families, for example doors, curtain walls, furniture and lighting fixtures Doors
Family A group of elements with shared graphics and parameters; Autodesk states that all of the elements you use in Revit are families A single flush door family
Type A variation of the family; Autodesk’s example is one door family in three sizes of the same style 36 by 84 in. flush door
Instance One placed element in the model; instance properties apply only to that element The door in room 204

Autodesk’s help adds that a family contains the graphic information, plan, elevation, section and 3D views, used for an element. A type change, such as swapping a door from one size to the next, updates every instance of that type. An instance change, such as the sill height of one window, affects only that window.

This is why two Revit models of the same building can differ greatly in usefulness. A model whose walls are real wall types with layers and levels can be scheduled, quantified and changed. A model built from generic placeholder shapes looks the same in 3D and answers none of those questions.

Levels and views

Levels are the vertical skeleton of the model. Autodesk’s help defines them as finite horizontal planes that act as a reference for level-hosted elements, such as roofs, floors and ceilings. The same page notes that when you add levels you can create an associated plan view, so each floor gets a floor plan view tied to its level.

Views are how the database is looked at. A floor plan, a reflected ceiling plan, an elevation, a section, a 3D view and a schedule are each a saved way of displaying the model. A sheet is a drawing page that holds several views at a set scale. Because views and sheets are generated, a section can be corrected by editing the model, not the section.

Revit model vs DWG drawing

A DWG is a drawing file made in AutoCAD or a compatible program. It stores lines, arcs, text and blocks. A Revit model stores building objects with data. The two are often delivered together, and they answer different needs.

DWG drawing Revit model (RVT)
What it stores Lines, arcs, polylines, text, blocks Building elements with parameters (walls, floors, doors, ducts)
Plans, sections and elevations Each drawn and kept in step by hand Generated from one model
Schedules and quantities Counted by hand or by a separate tool Read from the model objects
3D Optional, separate effort Built in
Change a wall height Edit every drawing that shows it Edit once, views update
Typical use Permit sets, layouts, simple documentation, flat reference Design coordination, quantity takeoff, clash checks, facility data
File size and effort Smaller and faster to produce Larger and takes more modeling effort

Neither is better in general. A DWG floor plan is the right document for a tenant layout or a permit sheet. A Revit model is the right document when several disciplines build on the same geometry or when someone needs data from the objects. The guide to scan to CAD vs scan to BIM goes through the choice for existing buildings.

What the RVT file can and cannot do across versions

Revit files are tied to the release that saved them. Autodesk’s help states that Revit models are not backwards-compatible. When you open a model from an earlier release, Revit shows a dialog naming both releases and the upgrade starts automatically. Once the upgraded model is saved, you can no longer open it using an earlier release. If you cancel the upgrade dialog, the model is neither upgraded nor opened in the current release.

Three practical points follow.

  1. An older release cannot open a file saved in a newer release.
  2. Opening an older file in a newer release upgrades it, and saving makes that permanent. Keep a copy of the original if the other party still works in the older release.
  3. The recipient needs a release equal to or newer than yours. Before ordering a model, ask which Revit release the architect or engineer uses, and have the model delivered in that release or an older one.

Because of this, a Revit model is often delivered with exports for people who do not use Revit: DWG sheets for the drafting side and an IFC file for other software.

Linking vs importing

A Revit project often has other files pulled into it, such as a DWG site plan or a survey. Autodesk’s help says that in most cases linking is preferred over importing CAD files. Linked CAD files update when reloaded, so link the file if changes to it are anticipated. Imported CAD files add categories to the Revit model, which can affect performance and make it difficult to manage the display, and an imported file allows direct changes to the geometry if exploded. Linked files do not add those categories.

The same choice shows up with point clouds, where the model references a scan file instead of containing it. The step-by-step version is in how to import a point cloud into Revit.

IFC: a Revit model for software that does not use RVT

IFC (Industry Foundation Classes) is a model exchange format. Autodesk’s help describes the export as saving a model as an IFC file for use with an IFC-certified application that does not use the RVT file format. Revit exports building elements to an IFC file based on the categories, and subcategories, to which the elements belong, and the export produces the IFC file and a log file.

An IFC file carries the objects to another IFC-certified program. Treat it as an export, and keep the RVT as the source file that you edit.

How a Revit model of an existing building is made

For a building that already stands, there are no design files to start from. The modeler works from a registered point cloud: the scan is loaded into Revit as a reference, levels are set from it, and walls, floors, openings and other elements are modeled against the points. The sequence, from scan to delivered RVT, is laid out in the scan to Revit workflow.

How much of the building is modeled, and how much detail each element carries, is set by the level of development in the scope. The posts on LOD in BIM and what LOD 300 means cover that decision. We deliver scan-to-BIM Revit models modeled from a registered point cloud, with the level of development stated in the scope.

When you need a Revit model and when DWG drawings are enough

Order a Revit model when:

  • Several parties will build on the same geometry, such as architect, structural and MEP engineers coordinating in one project.
  • You need quantities or schedules read from the building, such as door, window or room data.
  • The project will be designed in Revit, so a model of the existing building is the natural starting file.
  • A client, agency or contract names BIM or Revit as the deliverable.

DWG drawings are enough when:

  • The work is a tenant fit-out, a permit set or a layout, drawn in AutoCAD.
  • You need plans, elevations and sections to measure from, without object data.
  • Nobody on the project uses Revit.
  • Budget or schedule favors the faster, lighter deliverable.

If the first answer to “do you need a model” is unclear, the usual route is to ask the party who will use the file which software they open it in and what they pull out of it. That answer decides the format. An as-built drawing set in DWG and PDF also comes from the same registered point cloud, so the format can be chosen after the scan.

FAQ

What is a Revit model?

A single database of building elements saved in an RVT file, from which plans, sections, elevations, 3D views, sheets and schedules are generated. Changing an element updates every view that shows it.

What is the difference between a Revit model and a Revit file?

The RVT file is the container; the Revit model is the building data inside it, with its views, sheets and schedules. In everyday use the two words mean the same thing.

Can an older version of Revit open a newer Revit file?

No. Autodesk states that Revit models are not backwards-compatible: a file saved in a newer release cannot be opened in an older one. Opening an older file in a newer release upgrades it, and once the upgraded model is saved it cannot be opened in the earlier release.

Is a Revit model the same as a CAD drawing?

No. A CAD drawing such as a DWG stores lines and text. A Revit model stores building objects with parameters, and the drawings are generated from them.

Can I open a Revit model without Revit?

Not for editing: the RVT format is Revit’s own. For sharing with people who do not use Revit, the model can be exported to IFC for IFC-certified applications, or to DWG sheets.

Do I need a Revit model for a renovation?

Not always. If the designer works in AutoCAD, DWG as-built drawings are enough. If the design team works in Revit, a model of the existing building saves them from building it themselves.

Sources

Ready when your site is.