3D Scanning Cost in 2026: Objects, Parts and Buildings
3D scanning usually costs under $1,000 for a small object scanned to a mesh, from about $1,000 for a part scanned and rebuilt as a CAD model, $2,000 to $4,500 for a house or an apartment with drawings or a model, $3,000 to $9,000 for an office or a commercial floor, and from $12,000 for a large building. The question covers two different jobs, an object on a bench and a building on its site, and they are priced in different ways: an object by its size and its surfaces, a building by the scan stations it needs and what is built on the scan. Below is our 2026 pricing for both in one table, what you are paying for, what moves the price, and when hiring a service makes more sense than buying a scanner.
How much does 3D scanning cost in 2026
Our 3D scanning is priced per project. The table gives the typical price of the scan together with what is built on it.
| What is scanned and delivered | Typical price |
|---|---|
| A small object scanned to a mesh (STL), without a CAD model | Usually under $1,000 |
| A simple part, scanned and modeled in STEP | From about $1,000 |
| A part with free-form surfaces, or two or three simple parts | $1,500 to $2,500 |
| A large part: a body panel, a fender, a forming tool | $3,000 to $6,000 |
| A whole machine, a vehicle or an assembly | Quoted on its own, usually from $8,000 |
| A single room, a basement or one small floor | From about $1,000 |
| A building’s registered point cloud only | From about $1,200 for a house or a floor |
| A house or an apartment, with drawings or a model | $2,000 to $4,500 |
| An office or a commercial floor, with drawings or a model | $3,000 to $9,000 |
| A large building | From $12,000, quoted on its own |
The first five rows are objects and parts, priced in detail in the guide to 3D scanning for reverse engineering cost. The rest are buildings: 3D laser scanning cost covers the scan itself, as-built drawings cost the drawing sets, and scan to BIM cost the Revit models.
These are our typical ranges, and a specific job can land outside them. The quote is a fixed price for the project, with the scan and the work built on it priced together.
What you are paying for
A 3D scanning job is a visit and a file. The visit is the scanner moved around the object, or set up station by station through the building, until every surface that matters has been seen. The file is the cleaned mesh or the registered point cloud, checked and delivered in the formats your software reads. Most jobs also need something built from the scan: a CAD model of a part, drawings or a Revit model of a building. The scan is often the smaller part of the cost; what is built on it decides the rest.
| Deliverable | What it is | Typical use |
|---|---|---|
| Mesh (STL, OBJ) | The scanned surface of an object as a network of triangles | 3D printing, checking wear, visual reference |
| CAD model (STEP) | A solid model of a part with its design sizes restored | Machining, modifying, a replacement part |
| Point cloud (E57, RCP/RCS) | Millions of measured points of a building, registered into one cloud | A design team that draws or models from the scan itself |
| Drawings (DWG, PDF) | Floor plans, ceiling plans, elevations and sections | Renovation design, permits, leasing |
| BIM model (Revit, IFC) | A 3D model of the building’s walls, floors, structure and systems | Design and coordination in Revit |
Parts and objects
An object is scanned with a handheld scanner moved around it, in the shop or wherever it sits, and the price follows its size, how much of it is free-form surface, and what the model is for. A scan alone, as a mesh, is the lowest price; a CAD model adds the work of rebuilding the part as a solid with its flat faces, bores and standard sizes restored; drawings for a machine shop are added on top. The guide to 3D scanning for reverse engineering cost gives the prices by type of part, with a worked example, and the reverse engineering services page describes the work.
Buildings
A building is scanned station by station with a terrestrial laser scanner, and the field work is priced on the number of stations it takes to see every room that has to appear in the deliverable, not on a flat rate. For a first budget, a rate per square foot still helps: a scan with a Revit model runs from about $1.10 per square foot on a small house down to $0.30 and under on a building of 40,000 square feet, and a scan with floor plans runs about 15 percent less. The guides to 3D laser scanning cost, scan to BIM cost and as-built drawings cost give the tables, and the guide to why there is a minimum fee explains small jobs.
What moves the price
- Size and complexity. More rooms or more surfaces mean more stations or more scanning passes; a free-form part takes longer to model than one made of flat faces and holes.
- What is built on the scan. A mesh or a point cloud alone is the lowest price; a CAD model, a drawing set or a Revit model adds the modeling or drafting time.
- Accuracy. A tighter stated accuracy means denser scanning at shorter range and more careful modeling.
- Access. Occupied spaces, locked rooms, ceilings that have to be opened, parts that cannot be moved.
- Quantity. Several parts or several floors in one job share the visit and the setup.
Hire a service or buy a scanner
“How much does 3D scanning cost” sometimes means the price of a scanner. Entry-level scanners for hobby work and 3D printing are inexpensive and can be enough for that. Metrology-grade handheld scanners and survey-grade terrestrial scanners cost far more, need registration and modeling software on top, and take practice to use well.
| Hire a service | Buy a scanner | |
|---|---|---|
| Fits | A few projects a year | Scanning every week |
| What you pay for | Each job, at a fixed price | The instrument, the software, the training and the time |
| What you get | The finished deliverable | The ability to scan; the modeling is still your work |
For a few projects a year, hiring is usually cheaper than owning the instrument and the software and learning both; for a firm that scans every week, owning makes sense.
Getting a quote
For an object, send photographs from several sides with a ruler in the frame, its approximate size and what the model is for. For a building, send the address, the deliverables you need, any existing drawings and a few photographs. The fixed quote arrives within one business day. The 3D scanning for parts and 3D laser scanning pages describe the services, and we scan in all 50 states.
FAQ
How much does 3D scanning cost?
A small object scanned to a mesh usually comes in under $1,000, and a part with a CAD model starts at about $1,000. For buildings, a registered point cloud of a house or a floor starts at about $1,200, a house or an apartment with drawings or a model usually runs $2,000 to $4,500, and an office or a commercial floor $3,000 to $9,000. Large buildings are quoted on their own, from $12,000.
How much does it cost to have something 3D scanned?
A small object scanned to a mesh in STL usually comes in under $1,000. A part rebuilt as a CAD model in STEP starts at about $1,000, a part with free-form surfaces usually runs $1,500 to $2,500, and a large part such as a body panel $3,000 to $6,000.
Is 3D scanning priced per square foot?
For buildings, as a first estimate: a scan with a Revit model runs from about $1.10 per square foot on a small house down to $0.30 and under on a large building. The quote is a fixed price set by the stations the building needs and what is built on the scan. Objects are priced by their size and surfaces, not by area.
Should I buy a 3D scanner or hire a service?
For a few projects a year, hiring is usually cheaper than owning a professional scanner and its software. For weekly use, owning makes sense.
How long does 3D scanning take?
A part or a house is usually scanned in a day. A mesh usually follows within a few days, a CAD model of a part in one to two weeks, and drawings or a model of a house in two to three weeks.
Sources
- ISO 10303 (STEP), list of parts: Part 21, the exchange format of the CAD models named here.
- USIBD Document C120, Level of Accuracy Specification Guide, version 2.0 (2016): how the accuracy of a building scan and its deliverables is stated.


