Skip to content

BlogGuides

As-Built Models: What They Are and When You Need One

As-Built Models: What They Are and When You Need One

An as-built model is a 3D model of a building as it actually stands, usually a Revit model built from a laser scan of the building. Where as-built drawings show the existing building as plans, sections and elevations, an as-built model shows it as walls, floors, columns, doors and systems that a design team can work in directly, cut drawings from and check new work against. This guide explains what an as-built model is, how it differs from as-built drawings, how it is made, what it contains, and when it is worth ordering.

As-built model vs as-built drawings

Both describe the same building, measured from the same scan. The difference is what the team does next.

  • As-built drawings are 2D sheets in DWG and PDF. They suit a team that works in AutoCAD, a permit set, a lease exhibit, or a record set for an owner. The guide to what as-built drawings are describes them.
  • An as-built model is a 3D file, most often Revit, in which each element is an object with a type, a size and a position. It suits a team that designs in Revit, coordinates with consultants in 3D, or needs to check new ducts, pipes and steel against what is already there.

If the downstream team designs in Revit, a model saves them from re-tracing drawings into one; if nobody will open it in Revit, drawings are the lighter order. The guide to scan-to-CAD vs scan-to-BIM helps decide.

How an as-built model is made

The building is scanned with a terrestrial scanner of the Trimble X7 class, rated by its datasheet at a 3D point accuracy of 2.4 mm at 10 m (one standard deviation), station by station, and the stations are registered into one point cloud. The cloud is indexed for Revit and linked into the project on shared coordinates, and the model is built element by element against the points, so a wall in the model stands where the wall stands in the building. Before delivery the model is checked against the cloud, and elements outside the stated accuracy are corrected. The guide to the scan-to-Revit workflow walks through each step.

What it contains

The scope names the element categories and the level of development for each, in the BIMForum Level of Development Specification’s terms. A typical as-built model contains the walls, floors, roofs and ceilings, the columns and beams that can be seen, the doors, windows and stairs, and fixed equipment, usually at LOD 300, where an element is represented “such that its quantity, size, shape, location, and orientation can be measured”. Mechanical, electrical and plumbing systems are added from the same scan where they are visible, as the MEP BIM page describes. What the scanner could not see is shown only from existing drawings, marked as unverified, or left out, and the scope says which.

The accuracy is stated in the U.S. Institute of Building Documentation’s Level of Accuracy terms; a typical model is represented at LOA30, a deviation between 15 mm and 5 mm at the 95 percent confidence level. The model is delivered as a Revit file in your version, or as IFC or an ArchiCAD file, with the registered point cloud in E57 and RCP/RCS.

When it is worth ordering

  • A renovation or an addition designed in Revit.
  • A fit-out where new systems have to be coordinated with existing ones.
  • A facility team that wants a model of its buildings for planning and maintenance.
  • A historic building, where the model carries the irregular geometry and the history; the guide to HBIM covers that case.

Price and time

Our typical ranges, scanned and modeled: a house or an apartment, $2,000 to $4,500; a house with its facades and the site, $2,500 to $5,000; an office or a commercial floor, $3,000 to $9,000; large buildings from $12,000, quoted on their own. A model built from a point cloud you already have is quoted on that cloud. The quote arrives within one business day. The scan usually takes a day for a house or a floor, and the model usually follows in two to three weeks for a house, in two to four weeks for a commercial floor and in four to six for a whole building. The scan-to-BIM page describes the service, and we scan in all 50 states.

FAQ

What are the different types of as-built documents?

As-built drawings (plans, reflected ceiling plans, elevations, sections), as-built models in Revit or IFC, and the registered point cloud they are both built from.

What is an as-built model?

A 3D model of a building as it actually stands, usually a Revit model built from a laser scan, with walls, floors, openings, structure and systems as objects.

What is the difference between as-built drawings and an as-built model?

Drawings are 2D sheets in DWG and PDF; a model is a 3D file a design team works in, cuts drawings from and coordinates with. Both come from the same scan.

What level of development is an as-built model?

Usually LOD 300 for the main categories, set per category in the scope, with LOD 200 for massing and LOD 350 where new work has to meet existing elements.

How accurate is an as-built model?

It is stated in USIBD Level of Accuracy terms, typically LOA30, and checked against the point cloud before delivery.

How much does an as-built model cost?

A house usually $2,000 to $4,500, a commercial floor $3,000 to $9,000, large buildings from $12,000.

Sources

Ready when your site is.