Skip to content

BlogGuides

What Is 3D Laser Scanning? How It Works and What It Records

What Is 3D Laser Scanning? How It Works and What It Records

3D laser scanning is a way of measuring a building, a site or an object by sweeping a laser over it and recording the distance to millions of points on its surfaces. The result is a point cloud: a measured 3D record of everything the scanner could see, from which drawings, models and measurements are taken afterwards. This guide explains how 3D laser scanning works, what it records and what it does not, how accurate it is, and what it is used for.

How it works

A terrestrial laser scanner stands on a tripod and sends out a laser beam that it sweeps around itself, horizontally and vertically. For each point the beam hits, the scanner measures the distance, either by timing a pulse or by reading the phase of a modulated beam, and combines it with the beam’s direction to get a point in 3D. A scanner of the Trimble X7 class, by its datasheet, times pulses, measures up to 500,000 points a second over a range of 0.6 to 80 m, and uses a class 1 laser that is eye safe, so people can stay in the room while it works.

The scanner measures only what it can see from where it stands, so it is moved from station to station, each taking a few minutes, until every room, facade and stair that matters has been seen. The stations are then registered, aligned into one point cloud in one coordinate system; the guide to point cloud registration explains how. Built-in cameras photograph each station, so the points carry color and every station comes with a panoramic image.

What it records

Every surface in the scanner’s line of sight: walls, floors and ceilings with their real slopes and bows, columns and beams, doors and windows, stairs, facades and roofs, pipes, ducts and conduit where they are exposed, equipment, and the site around a building. Because the record is complete rather than chosen, a question that comes up months later, the height of a window head or the clearance under a duct, is answered from the cloud without a second visit.

What it does not record is what it cannot see: framing behind drywall, systems above a closed ceiling, anything inside walls or below slabs. Clear glass and still water return little of the beam, and mirrors produce false points that are removed. The guide to whether lidar can see through walls covers these limits.

How accurate it is

A scanner of the Trimble X7 class holds a 3D point accuracy of 2.4 mm at 10 m and 3.5 mm at 20 m (one standard deviation) by its datasheet. Registration adds the error of placing each station, which the registration report lists station by station. Drawings and models built on the cloud are stated in the U.S. Institute of Building Documentation’s Level of Accuracy terms, as a standard deviation at the 95 percent confidence level; a typical renovation set or model is represented at LOA30, a deviation between 15 mm and 5 mm.

Small parts and objects are scanned with a different instrument, a handheld metrology scanner of the HandySCAN SILVER class, rated by its brochure at up to 0.040 mm; the 3D scanning for parts page describes that work.

What it is used for

  • As-built drawings of existing buildings for renovations, tenant improvements and permits, described in the guide to what as-built drawings are.
  • Scan-to-BIM: Revit models of existing buildings for design and coordination.
  • MEP documentation of the systems above ceilings and in plant rooms.
  • Construction: records before demolition, before close-in, and before new work is fabricated to meet existing work, as the guide to laser scanning in construction explains.
  • Historic preservation and restoration, where the irregular geometry is the thing to keep.
  • Reverse engineering of parts and equipment with no drawings.

The guide to lidar vs laser scanning vs photogrammetry compares it with the other ways of capturing buildings in 3D.

What you receive

The registered point cloud in E57, the ASTM exchange format for 3D imaging data, and in RCP/RCS for Revit, with the registration report and the station images; drawings in DWG and PDF or a Revit model when they are ordered. The guide to laser scanning deliverables lists each one.

Price and time

A registered point cloud starts at about $1,200 for a house or a floor. With drawings or a model on top, our typical ranges are $2,000 to $4,500 for a house or an apartment, $2,500 to $5,000 for a house with its facades and the site, and $3,000 to $9,000 for an office or a commercial floor; large buildings run from $12,000 and are quoted on their own. A house or a floor is usually scanned in a day. The quote arrives within one business day. The 3D laser scanning page describes the service, and we scan in all 50 states.

FAQ

Can I use my phone as a lidar scanner?

Some phones carry a small lidar sensor that can capture a rough 3D model of a room. It is useful for quick sketches and measurements, but its range and accuracy are far below a terrestrial scanner’s, so it is not a base for drawings or models that will be built to.

What is 3D laser scanning used for?

As-built drawings, scan-to-BIM models, MEP documentation, construction records, historic preservation and reverse engineering of parts.

What is 3D laser scanning?

Measuring a building, site or object with a laser that records the distance to millions of points on its surfaces, producing a point cloud from which drawings, models and measurements are taken.

How does a 3D laser scanner work?

It sweeps a laser around itself from a tripod, measures the distance to each point the beam hits, and records the points in 3D. The scanner is moved from station to station and the stations are registered into one cloud.

How accurate is 3D laser scanning?

A scanner of the Trimble X7 class is rated at 2.4 mm at 10 m (one standard deviation) by its datasheet. Drawings and models are stated in USIBD Level of Accuracy terms, typically LOA30.

Is the laser safe?

Yes. The scanner uses a class 1 laser, eye safe by its datasheet, and people can stay in the room while it scans.

How much does 3D laser scanning cost?

A registered point cloud starts at about $1,200 for a house or a floor; with drawings or a model, a house usually runs $2,000 to $4,500 and a commercial floor $3,000 to $9,000.

Sources

Ready when your site is.